Sensor monitoring in the cabinet
Bring several sensor types into one module on the rail.
RTD · thermocouple · 4–20 mA · voltage
Industrial automation
Industrial measurement, acquisition and control modules
ViMEAS-II measures. ViMEAS-V-PRO also controls. Both send data in real time and mount on a 35 mm DIN rail, and our engineers can build the system around them.
What we measure and control
Both modules measure. ViMEAS-V-PRO also acts on the result.
-
RTD temperature
PT100 and PT1000, 2-wire and 3-wire.
PT100: ±0.20 °C typ
-
Thermocouple
With internal cold-junction compensation.
Types B, E, J, K, N, R, S, T
-
4–20 mA
2-wire, 3-wire and 4-wire transmitters.
±0.05 %FS typ
-
Load cell and bridge
Load cells and bridge-type sensors.
Load cell: ±0.30 %FS typ
-
LVDT
Displacement sensor input.
±0.10 %FS typ
-
Voltage and pressure
Voltage-output sensors and pressure transmitters.
Up to ±20 V differential
-
Analog control output
Selectable source for the motor driver.
Potentiometer / 0–10 V / ±10 V
-
Relays
Two SPDT / Form C outputs.
250 VAC, 10 A resistive
-
Motor and valve
Direction and enable outputs, plus a valve driver.
Valve: 24 VDC, 5 A
-
Digital I/O
Inputs for 24 VDC signals, 5 V outputs.
4 inputs, 3 outputs
Accuracy values are typical figures from the datasheets, valid under their stated validation conditions.
How the ViMEAS system works
It measures sensor data with high precision, processes it on the device, provides automatic control and passes it reliably to your existing systems.
Sensor inputs
- RTD temperature
- Thermocouple
- 4–20 mA
- Load cell and bridge
- LVDT
- Voltage and pressure
Control and I/O V-PRO
- Analog control output
- Relays
- Motor and valve
- Digital I/O
-
Measures
Digitizes sensor signals at high resolution.
- 24-bit ADC
- Programmable PGA
- Up to 40,000 SPS
-
Processes data
Analyzes and calibrates measurement data on the device and converts it to engineering units.
- Multi-point calibration
- Filtering (FIR/IIR)
- Min / Max / Average
- Scaling & linearization
- Threshold control
- Calculation libraries
-
Controls V-PRO
Manages outputs based on processed measurements or defined algorithms.
- Limit / alarm management
- Automatic output control
-
Transmits
Sends processed measurements, status and alarm information to your systems over its connection interfaces.
- RS-485
- RS-232
- USB 2.0
- RS-485 ViMEAS-II · V-PRO Half-duplex, up to 1200 m depending on application and baud rate
- RS-232 V-PRO Serial link to an external device
- USB 2.0 V-PRO Configuration, firmware updates, diagnostics, data transfer
System integration
-
Monitoring systems Real-time monitoring and analysis
-
Test and calibration Device testing and verification
-
Data acquisition Recording, reporting and archiving
-
PLC, SCADA, MES, ERP Works with industrial systems
-
High accuracy 24-bit measurement, multi-point calibration
-
Advanced processing Filtering, statistics, threshold analysis
-
Flexible integration Fits existing systems over RS-485, RS-232 and USB
Where ViMEAS fits in your system
A compact measurement, data processing and control unit that connects the sensors in the field to your existing automation and test systems.
Real installation
In the control cabinet, on a 35 mm DIN rail, with a 24 VDC supply.
Your existing monitoring and control system
- PLC
- SCADA
- Test and calibration
- Data acquisition (DAQ)
- MES / ERP
RS-485 / RS-232 / USB 2.0 (by model)
ViMEAS-V-PRO (5 channels)
ViMEAS-II (2 channels)
- Measures
- Processes data
- Controls
- Transfers
Sensor inputs (Measurement)
- RTD temperature
- Thermocouple
- 4–20 mA
- Load cell and bridge
- LVDT
- Voltage and pressure
Control and digital I/O (Output)
- Analog output
- Relay
- Motor
- Valve
- Digital I/O
Where the modules fit
Application areas named in the datasheets.
Test and calibration
Follow precise readings on the test bench in real time.
Load cell · pressure transmitter · LVDT
Process monitoring and automation
Measure the process and switch on the result.
Measurement · relays · valve
Machine control
Drive a motor from the same unit that reads the sensors.
Analog output · direction · enable · digital I/O
The ViMEAS modules
Choose by what you need to do. Full specifications and datasheets are on vimeas.viparts.com.
ViMEAS-II
Precise analog sensing in the control cabinet.
- 2 measurement channels
- 24-bit ADC
- RS-485, 35 mm DIN rail
ViMEAS-V-PRO
Measure and act from one DIN-rail unit.
- 5 measurement channels
- Real-time data over USB and RS-485
- Relays, analog control, motor and valve outputs
Why ViMEAS?
What the datasheets publish, with the conditions.
-
One input, many sensors
Each channel takes RTD, thermocouple, 4–20 mA, load cell or LVDT, set by DIP switch.
-
Published performance
Accuracy and repeatability tables for 4–20 mA, load cell, LVDT and PT100, with validation conditions.
-
Built for the cabinet
24 VDC supply and snap-fit mounting on a 35 mm DIN rail (EN 60715).
-
Excitation on board
Programmable IDAC current sources and a +10 V external output.
-
RS-485 up to 1200 m
Half-duplex at 115200 bps. Maximum length depends on the application and baud rate.
-
Real-time data
Measurements reach your system live: over RS-485 on both modules, and USB on ViMEAS-V-PRO.
Engineering around the modules
New products and legacy lines, under one engineering roof.
-
Motor control
Drives, controllers, power electronics and embedded software.
-
Industrial networks
Real-time data transfer over fieldbus and Ethernet-based protocols.
-
Sensors
Sensor development for motion, pressure, environment and diagnostics.
-
Predictive maintenance
Spot early signs of failure and reduce unplanned downtime.
-
Industrial software
PLC, SCADA, MES and ERP software for automation platforms.
-
Legacy modernization
EOL replacements, firmware refactoring and protocol bridging.
Need measurement on the rail, or a full automation cell?
Explore the ViMEAS products for full specifications and datasheets, or tell us your sensors and signals.
Explore ViMEAS products (opens in a new tab) Contact our team
Contacts
Tell us about your project
We’ll review it carefully and get back to you with the best technical approach.
All information you share stays private and secure — NDA available upon request.
Prefer direct email?
[email protected]
Reply within one business day
8+ years of engineering experience
50+ completed projects
ISO 9001:2015 and ISO 45001:2018 certified